3713

 

 

 

The 3713 Shower Lock*

Used with a 924 or 925 Strike Plate
(depending on the door swing).

 

Polished Chrome plated Brass.

 

Materials:
Brass with Polished Chrome finish. Completely non-ferrous (will not rust or corrode) springs Stainless Steel.

 

Dimensions shown in milimeters.

Case & Counter Plate: 50x60mm (2”x3/8”).

Case Height 13mm (1/2”).

 

Door thickness must be specified when ordering.

 

A Petite Rim Mounted Latch with oval knobs, ideal for use on glass or plexi-glass doors.

 

Rim Locks are handed Left or Right and Inward or Outward Swing.
Door Handing Diagram

 

*these items are not manufactured by Schwepper.

The 8500 Shower Lock*

An innovative lock that can be installed on thinnest of doors, up to a minimum thickness. It is equipped with an anti-vibration spring latch, a watertight seal and its inner springs are highly resistant, thus enabling to install any kind of handle in combination with the boat’s design. The 8500 Shower Lock can also be purchased without its specific rim striker, as the lock is suitable for installation with a standard striker plate, in case the door shuts against standard frames.

 

Polished Chrome plated Brass.

 

5093 Lever has an 8mm spindle.

 

Overall Lever size is 115mm x 20mm.

 


*these items are not manufactured by Schwepper.

Shown here w/ 5093 Lever
5093
2439FOU

2439 3-Point Locking System

Available with a 55mm or 65mm backset.


2439 has a 19mm Latch protrusion - Ideal for Fire Rated & / or Exterior Water Tight Doors.


Locks & Strike Plates are handed Left or Right.
Door Hand Diagram

2439Z
2439FOU

3811APZ

5626SP

3811APZ Anti Panic Lock

Brushed Stainless Steel.

 

Available with a 55mm or 65mm backset & a 9mm hub.

 

When locked, the door can still be opened from the inside by using the lever.

 

The outside plate has a rigid knob or lever & can only be opened by the key.

 

The door can be opened from the inside by the knob/lever - (even if locked).

 

Thumb Turn Profile Cylinders should not be used on this item. Double cylinders should be used.

4036

Down / Floor Locking Mortises

Mortises that lock via a rod into the floor.

 

4036 Lock with Bar, Striking Plate and Hole for Security Cylinder.*

 

Bar: L - 990mm, D - 10mm
Bar's Locking: 25mm
Faceplate: 232mm x 25mm x 2.5 mm
Box Casement: 180mm x 80mm x 15 mm
Square Handle: 8 mm
Backset: 60 mm

4037

4037 Lock with Bar, Striking Plate and Hole for Security Cylinder.*

 

Bar: L - 990mm, D - 10mm
Bar's Locking: 25mm
Faceplate: 150mm x 25mm x 2.5mm
Box Casement: 98mm x 80mm x 15mm
Square Handle: 8m
Backset: 60mm

1407

1407 Profile Cylinder

Various length Profile Cylinders available. (Profile Cylinder)