We offer a selection of Sliding Door Locks with flush trim, ideal for Pocketing Doors.
They are a mixture of Stainless Steel and Brass and are available in a Polished Chrome
(Polished Stainless Finish).



Suitable for Doors a minimum of 32mm thick (11/4")
Standard with Double Profile
Cylinder Key Entry both sides)
Other Cylinders Available (i.e. Thumbturn Inside, Key Outside)
Backset: 60mm (23/8")
Faceplate: 220 x 22mm (83/4" x 7/8")

Stainless Steel Escutcheons:
226 x 94mm (9" x 11/16")



Suitable for Doors a minimum of 20mm thick (3/4").
Thumbturn inside.
Emergency Access Outside.
Backset 60mm( 23/8")

Thumbturn protrudes 11mm (7/16")
from surface of plate.
158 x 86mm (6 3/16" x 3 7/16")

3796 & 3448

3796 & 3448

Both are suitable for Doors a minimum
thickness of 20mm (3/4")
Backset: 60mm (2 3/8")
Stainless Steel Escutcheons:
158mm x 86mm (6 3/16" x 3 7/16")






1269Z / WC

Similar in design to the discontinued1786C.


The 1269 is available in both a Key Locking (Z) & a Privacy (WC).


Made from Stainless Steel with a high polish mirror finish. It is, however, only available in the handing (direction) shown (Left Hand).


Polished Stainless Steel Suitable for Doors 1" - 1-3/8" thick.


Note: For 1" thickness installation is not completely flush - key side extends 3/8" above surface of door.

Backset: 1-3/4"

Key side: 2-7/16" x 5-1/8"

Inside: 2-7/8" x 5-1/8"


WC - Privacy locking from inside only - no emergency access.


The 1269Z & the discontinued 1786C locksets are very similar with only slight differences in the measurements as show below:

1269Z vs 1786C Dimensions